| Product Image |
Item Name- |
Price |
 |
These new, factory-fresh pager motors come ready-to-run: no eccentric weight removal necessary like on surplus pager motors! These new, factory-fresh... |
£2.93 Ex VAT
£3.44 Inc VAT
Add:
|
 |
1/4" Fuseclip motor mount, great for holding the standard Pager motor |
£0.21 Ex VAT
£0.25 Inc VAT
Add:
|
 |
Pager motor technology has made it easier for us to find a suitable replacement for the original TPM for substantially less! Want to build something... |
£3.74 Ex VAT
£4.39 Inc VAT
Add:
|
 |
This 030 form-factor motor with precious-metal brushes offers pretty good performance for a flat-sided motor. Offering 7400 rpm @ 4.7V, drawing 150mA... |
£2.00 Ex VAT
£2.35 Inc VAT
Add:
|
 |
This 030 form-factor motor with precious-metal brushes offers pretty good performance for a flat-sided motor. Offering 7400 rpm @ 4.7V, drawing 150mA... |
£1.62 Ex VAT
£1.90 Inc VAT
Add:
|
 |
This is the standard motor that is built in to the GM2/3/8/9. Nominally runs at 6VDC and consumes roughly 35mA. So if you've blown up your GMx motor,... |
£1.49 Ex VAT
£1.75 Inc VAT
Add:
|
 |
This motor offers 50 in*oz of torque, rotating 360 degrees every 1.6 seconds (38 rpm - just a hair slower than a servo), at 5V, drawing 600mA at... |
£4.53 Ex VAT
£5.32 Inc VAT
Add:
|
 |
This model differs from the GM2 in that it has a 90 degree output shaft. This motor offers 50 in*oz of torque, rotating 360 degrees every 1.6 seconds... |
£4.53 Ex VAT
£5.32 Inc VAT
Add:
|
 |
These unique gear motors are actually clear-case servos with continuous-rotation ability. No circuit board means you get a cheap, robust,... |
£9.46 Ex VAT
£11.12 Inc VAT
Add:
|
 |
This output gear changes the GM4 from continuous rotation to limited rotation. The GM4 has continuous-rotation output, but sometimes you need to... |
£0.38 Ex VAT
£0.45 Inc VAT
Add:
|
